How to make USB bootable for windows 7 ,8 and 10

To make USB flash drive Bootable follow the below steps.

1. Open the command prompt: first of all click on Start button or hold the windows key+ R and type cmd and press enter. You need to run Command Prompt as an Administrator. 

2. Open the disk management utility. Type the command diskpart to open the disk management utility.

3. Display the connected disks. Type the command list disk to show a list of all the drives connected to your computer. Your USB drive should be listed here as well. Make note of the number next to your USB drive below [Disk ###]

4. Select the USB drive. Enter the command select disk #, replace “#” with the number of your USB drive. Here the USB is on 1 so we will write select disk 1

5.Clean the flash drive. Enter the command clean to verify the integrity of USB and erase all data from USB drive.

6.Create a bootable partition. Once the USB drive is clean, type this create partition primary.

7.Format the USB drive. Input the command format fs=fat32 quick. When you press Enter, this process will complete in few seconds.

8.Active the USB Drive. To make USB active and to boot properly write the command active and press enter.

9.Copy the operating system. Once the USB drive has been made bootable, open the folder or drive where you have windows you can select all files and send to removable disk or just copy all the files and paste it in USB drive.

Author : Computer Society

Share this

Related Posts